| 1 |
Shen Yizhou, Wu Xinghua, Tao Jie*, Zhu Chunling, Lai Yuekun, Chen Zhong. Icephobic materials: fundamentals, performance evaluation, and applications. Progress in Materials Science, 2019, 103: 509-577. |
| 2 |
Cheng Xuan, Guo Xunzhong, Tao Jie*, et al. Investigation of the Effect of Relative Thickness (t0/d0) on the Formability of the AA6061 Tubes during Free Bending Process. International Journal of Mechanical Sciences, 2019, 160:103-113. |
| 3 |
Kai Jin, Jianhua Wang, Xunzhong Guo, Joseph Domblesky, Hui Wang, Xia Jin. Experimental analysis of electro-assisted warm spin forming of commercial pure titanium components [J] Journal of Advanced Manufacturing Technology. |
| 4 |
Xunzhong Guo, Cheng Wang, Yong Xu, Shihong Zhang, Ali Abd El-Aty. Incremental forming characteristics of hollow parts with grooves[J] Journal of Advanced Manufacturing Technology |
| 5 |
Guo X, Wei W, Xu Y, et al. Wall thickness distribution of Cu–Al bimetallic tube based on free bending process[J]. International Journal of Mechanical Sciences, 2019, 150: 12-19. |
| 6 |
Xie Yuehan, Shen Yizhou (共同一作), Tao Jie, Jin Mingming, Chen Haifeng, Wu Yu, Hou Wenqing. Rational fabrication of superhydrophobic nanocone surface for dynamic water repellency and anti-icing potential. Journal of Bionic Engineering, 2019, Accepted. |
| 7 |
Xu Yingmei, Li Huaguan, Yang Yinfei, Hu Yubing, Tao Jie. Determination of residual stresses in Ti/CFRP laminates after preparation using multiple methods[J]. Composite Structures, 2019(210):715-723. |
| 8 |
李涛，陈浩，魏文斌，陶杰. 6061铝合金管自由弯曲螺旋成形工艺研究. 航空制造技术，2019, 62(16): 64-71. |
| 9 |
2018年度 |
| 10 |
Chen Yujie, Jin Kai, Li Huaguan, Lin Yanyan, Lu Yi, et al. Effect of peer ply and cooling rate on the tensile properties of Al/Gf/PP laminate prepared by hot pressing[J]. Journal of Sandwich Structures & Materials, 2018. |
| 11 |
Jin K, Yuan Q, Tao J, et al. Analysis of the forming characteristics for Cu/Al bimetal tubes produced by the spinning process[J]. The International Journal of Advanced Manufacturing Technology, 2018: 1-9. |
| 12 |
Pan L, Ding W, Ma W, et al. Galvanic corrosion protection and durability of polyaniline-reinforced epoxy adhesive for bond-riveted joints in AA5083/Cf/Epoxy laminates[J]. Materials & Design, 2018, 160: 1106-1116. |
| 13 |
Pan L, Hu J, Lv Y, et al. Modification of Ti-6Al-4V plates with Schiff base complex and adhesive performance of Ti-6Al-4V/PEEK[J]. Materials & Design, 2018, 144: 271-280. |
| 14 |
Pan L, Zhang A, Zheng Z, et al. Enhancing interfacial strength between AA5083 and cryogenic adhesive via anodic oxidation and silanization[J]. International Journal of Adhesion and Adhesives, 2018, 84: 317-324. |
| 15 |
Pan L, Wang Y, Hu Y, et al. Investigation on the effect of configuration on tensile and flexural properties of aluminum/self-reinforced polypropylene fiber metal laminates[J]. Journal of Sandwich Structures & Materials, 2018: 1099636218789620. |
| 16 |
Pan L, Lv Y, Nipon R, et al. Enhancement in Interfacial Adhesion of Ti/Polyetheretherketone by Electrophoretic Deposition of Graphene Oxide[J]. Polymer Composites, 2018. |
| 17 |
Guo Q, Ma F, Guo X, et al. Influence of mandrel on the forming quality of bending L-shaped hollow parts[J]. The International Journal of Advanced Manufacturing Technology, 2018, 95(9-12): 4513-4522. |
| 18 |
Guo X, Gu Y, Wang H, et al. The Bauschinger effect and mechanical properties of AA5754 aluminum alloy in incremental forming process[J]. The International Journal of Advanced Manufacturing Technology, 2018, 94(1-4): 1387-1396. |
| 19 |
Guo X, Xiong H, Li H, et al. Forming characteristics of tube free-bending with small bending radii based on a new spherical connection[J]. International Journal of Machine Tools and Manufacture, 2018. |
| 20 |
Guo X, Xiong H, Xu Y, et al. Free-bending process characteristics and forming process design of copper tubular components[J]. The International Journal of Advanced Manufacturing Technology, 2018, 96(9-12): 3585-3601. |
|