发表论文

序号 名称
1 [14] HU Shenghan, Cheng Cheng, Tao Jie, et al. Influence of deformation zone length on bending radius of SS304 tubes with small diameters manufactured via free bending-based active motion. Chinese Journal of Aeronautics, 2022.
2 Zhang Hao, Ali Abd El-Aty, Tao Jie*, Guo Xunzhong, Zheng Shuo, Cheng Cheng. Effect of Active Deflection on the Forming of Tubes Manufactured by 3D Free Bending Technology[J]. Metals, 2022, 12(10): 1621.
3 2021年度
4 Zeng Chaojiao, Shen Yizhou, Tao Jie, Chen Haifeng, Wang Zhe, Liu Senyun, Lu Daipeng, Xie Xinyu. Rationally regulating the mechanical performance of porous PDMS coatings for the enhanced icephobicity towards large-scale ice. Langmuir, 2021, Accepted.
5 Wang Zhen, Tao Jie, Shen Yizhou, Liu Senyun. Molecular design and preparation of an integrated CNT@EVA/PVDF composite film heater for effective deicing applications. Journal of Materials Science, 2021, Accepted.
6 Jiang Jiawei, Shen Yizhou, Wang Zhen, Tao Jie. Anti/de-icing performance of the one-step electrodeposited superhydrophobic surfaces: Role of surface polarity regulated by hydrocarbon radical length. Chemical Engineering Journal, 2021, 133276.
7 Shu Song, Huang Xin, Cheng Zonghui, Shen Yizhou, He Zhaoru, Liu Weilan. Understanding the relations between surface stress state and microstructure feature for enhancing the fatigue performance of TC6 titanium alloy. Coatings, 2021, 11: 1261.
8 Shen Yizhou, Cai Zeyu, Tao Jie, Li Kunlong, Chen Haifeng, Wu Zhengwei, Jia Zhenfeng, Li Huaguan. Multi-type nanoparticles in superhydrophobic PU-based coatings towards self-cleaning, self-healing and mechanochemical durability. Progress in Organic Co
9 Jiang Jiawei, Shen Yizhou, Tao Jie, Jia Zhenfeng, Xie Xinyu, Zeng Chaojiao. Drag reduction characteristics of microstructure inspired by the shapes of barchan dunes under high speed flow condition. Journal of Renewable Materials, 2021, 10: 781-797.
10 He Zhaoru, Shen Yizhou, Tao Jie, Huang Xin, El-Aty Ali Abd. Laser shock peening regulating aluminum alloy surface residual stresses for enhancing the mechanical properties: Roles of shock number and energy. Surface and Coatings Technology, 2021, 421:
11 Shen Yizhou, Xie Xinyu, Tao Jie, Chen Haifeng, Cai Zeyu, Liu Senyun. Mechanical equilibrium dynamics controlling wetting state transition at low-temperature superhydrophobic array-microstructure surfaces. Coatings, 2021, 11: 522.
12 Shen Yizhou, Li Kunlong. Superhydrophobic F-SiO2@PDMS composite coatings prepared by a two-step spraying method for the interface erosion mechanism and anti-corrosive applications. Chemical Engineering Journal, 2021, 413: 127455.
13 Wu Zhengwei, Shen Yizhou, Tao Jie, Jia Zhenfeng, Chen Haifeng, Jiang Jiawei, Wang Zhen. Green synthesis of mechanical robust superhydrophobic CNT@PU coatings with high flexibility for extensive applications. Journal of Bionic Engineering, 2021,18: 4.
14 Wang Hao, Jin Kai, Tao Jie. Design and experiment of polyimide / Ti wire composite with the interface chemically grafted through carbon nanotubes. Advanced Materials Interfaces,2021,8,2001863.
15 Tao Yangyang, Xuan Shanyong, Tao Jie, Jin Kai, Wang Hao. Mechanical behaviour and deformation mechanism of Aluminium/ Gf/Polyamide uminates under dynamic strain aging. Applied composite materials, 2021:1-9.
16 Luo Hao, Jin Kai, Tao Jie, Wang Hao. Properties prediction and design of self-healing epoxy resin combining molecular dynamics simulation and back propagation neural network. Materials Research Express, 2021, 8(4):045308.
17 Xiang Junxian, Li Huaguan, Wang Hao, Li Hongli, Chen Xi, Tao Jie. Residual stress variation and deformation of shot peened glass fiber reinforced composites/aluminum-lithium laminates under thermal shock and thermal fatigue. Polymer Composites, 2021.
18 Kou Hantao, Tao Jie*, et al. Effect of temperature on the deep drawing forming performance of Ti/Al laminates: experimental investigation and finite element analysis. The International Journal of Advanced Manufacturing Technology, 2021, 114(9).
19 Wang Hao, Li Huaguan, Xu Yingmei, Lin yanyan, Li hongli , Tao Jie. Effects of Thermal Residual Stresses on Tensile and Interlaminar Shear Behaviors of GLARE Laminates. Applied Composite Materials, 2021, 28(3): 877-898.
20 Chen Hao, Wang Hui, Li Tao, Guo Xunzhong*, et al. Impact of bending dies with different friction forms on forming force and quality of tubes manufactured by free bending technology. Chinese Journal of Aeronautics,2021,34(04):253-264.
南京航空航天大学材料学院陶杰课题组 版权所有 All Rights Reserved. Copyright@2010
江苏省南京市将军路29号南京航空航天大学将军路校区 邮编:211100
taojie@nuaa.edu.cn